Description
D22 D25 Pixel Addressable Neon Strip – 360° RGB Pixel Neon Strip, DC24V, IP65 10m/roll no volt drop
Technical Specifications
| Parameter | Specification |
|---|---|
| Working voltage | DC 24V |
| Maximum power | 30W/m |
| Pixel count | 32 pcs/m |
| LED type | 3535 RGB |
| LED quantity | 192 pcs |
| Driver IC | TM1934 |
| Control mode | SPI |
| Package | 10m/roll |
| Diameter | 22 mm, 25mm optional |
| Color channel | RGB |
| Beam angle | 360° |
| Protection grade | IP65 |
| Break Point Continue | Yes |
| Body color | Black / White |
Control and Installation
The D22 uses SPI data and is compatible with suitable SPI pixel controllers. DMX-based workflows can be supported with an appropriate SPI-to-DMX interface or Art-Net/sACN pixel controller. Match the controller protocol, pixel order, and color order before final commissioning.
Use a stable DC 24V power supply with sufficient capacity for the complete load. For long runs, plan power injection and cable sizing carefully to reduce voltage drop. Keep data and power wiring properly separated, and maintain a common ground reference between the controller and power supply.
The IP65 rating supports many indoor and outdoor decorative applications, but connectors and cable entries must also be protected to maintain the complete installation rating.
Typical Applications
- Stage, touring, and event production
- Suspended shapes, scenic outlines, and props
- Retail displays and hospitality lighting
- Architectural contours and feature lighting
- Custom illuminated signs, letters, and formed structures
