D22 Addressable Neon Strip: 360° RGB Pixel Lighting for Professional Installations
D22 Addressable Neon Strip is a flexible 360-degree RGB pixel-lighting product designed for projects that need the smooth appearance of neon lighting with the dynamic control of an addressable LED strip. Instead of acting as a single-color light source, the strip is divided into controllable pixels so that effects can travel, chase, pulse, and change color along the fixture.
This makes the D22 suitable for stage productions, event installations, retail displays, architectural accents, and custom linear lighting where precise pixel control matters.
What Is an Addressable Neon Strip?
A conventional LED neon flex product usually displays one color or effect across an entire connected run. An addressable neon strip adds integrated driver ICs, allowing individual sections—called pixels—to be controlled separately.
The D22 uses the WS2811F IC and SPI control. Its 360-degree beam angle creates an evenly illuminated appearance from multiple viewing directions, while the flexible silicone body allows the strip to follow curves and custom shapes.
D22 Addressable Neon Strip Specifications
| Parameter | Specification |
|---|---|
| Working voltage | DC 24 V |
| Maximum power | 28 W |
| Pixel count | 20 pcs |
| LED type | 3535 RGB |
| LED quantity | 240 pcs |
| Driver IC | WS2811F |
| Control mode | SPI |
| Product weight (5 m) | 3 kg |
| Product dimensions | 22 mm |
| Color channel | RGB |
| Beam angle | 360° |
| IP grade | IP65 |
| Minimum bending radius | 50 mm |
| Available body colors | Black / White |
For a 5-meter assembly, the published configuration combines 240 RGB LEDs with 20 controllable pixels. This gives designers smooth linear light and a level of addressable control that is well suited to mapped effects and synchronized scenes.
Key Features and Benefits
360-degree RGB illumination
The round 22 mm profile spreads light around the fixture rather than concentrating it in one direction. This helps create consistent visibility for suspended shapes, curved paths, and installations viewed from different angles.
Addressable SPI pixel control
The WS2811F platform allows each pixel to be treated as an individual control point. With a compatible SPI controller, designers can create chases, gradients, color waves, and frame-by-frame effects. DMX-based workflows can also be supported when the correct SPI-to-DMX control equipment is used.
Flexible silicone construction
The silicone body provides a smooth, uniform light surface while remaining flexible enough for creative layouts. The D22 has a minimum bending radius of 50 mm, making it suitable for gentle arcs, letters, outlines, and other curved structures.
IP65 protection
With an IP65 rating, the D22 is protected against dust ingress and water projected from a nozzle. It can be used for many indoor and outdoor decorative applications, although it should not be continuously submerged unless a product specifically rated for that use is selected.
Black or white finish
The strip is available with a black or white outer body, allowing it to blend into dark scenic elements or bright architectural surfaces.
Installation and Control Considerations
Use a stable DC 24 V power supply
The D22 operates on DC 24 V. Never connect the strip directly to mains voltage. Select a power supply with enough reserve capacity for the complete load, and account for voltage drop on long runs through appropriate cable sizing and power injection.
Match the controller to the data protocol
The strip uses SPI data and the WS2811F IC. Use a compatible SPI pixel controller and verify the required data protocol, pixel order, color order, and voltage level. If the installation is controlled through DMX or lighting-console software, use a suitable SPI-to-DMX interface or Art-Net/sACN pixel controller.
Maintain a common data ground
For reliable data transmission, the controller and power supply should share the correct ground reference. Keep data cables short where possible and separate data lines from high-current power wiring to reduce interference.
Respect the bending radius
Do not force sharp folds, and avoid twisting or bending the strip in a direction that the product was not designed to follow. A minimum 50 mm bending radius helps protect the internal circuit and maintain long-term reliability.
Plan pixel mapping before installation
Addressable effects are easiest to manage when the pixel sequence is documented in advance. Record the starting direction, pixel count, controller output, and physical layout so that the mapping in the control software matches the installation.
Typical Applications
- Stage and touring production: outlines, scenic lines, props, and synchronized pixel effects.
- Events and exhibitions: curved booth details, suspended shapes, and interactive installations.
- Retail and hospitality: branded outlines, display accents, and dynamic ambient lighting.
- Architectural decoration: building contours, pathways, and feature lighting where a 360-degree appearance is useful.
- Custom fabrication: illuminated signs, letters, vehicles, and other formed structures.
Frequently Asked Questions
Is the D22 a standard RGB neon strip?
No. It is an addressable RGB neon strip. The lighting can be divided into controllable pixel sections rather than operating as one continuous color zone.
Can the D22 be controlled by DMX?
It can be integrated into DMX-based systems when used with a compatible SPI-to-DMX controller, pixel controller, or lighting console interface.
Can the D22 be used outdoors?
The product has an IP65 rating, which supports many indoor and outdoor decorative installations. The final enclosure, cable entries, connectors, and mounting method must also be protected to maintain the complete installation rating.
How far can one run extend?
Maximum run length depends on the controller, power supply, voltage drop, data signal quality, and installation conditions. For longer layouts, use power injection and separate data outputs according to the controller manufacturer’s recommendations.
Conclusion
The D22 Addressable Neon Strip combines a flexible 360-degree silicone profile with RGB pixel control, IP65 protection, and a practical 22 mm form factor. For designers who need smooth neon-style light with dynamic, mapped effects, it offers a strong balance of visual performance and installation flexibility.
Specifications in this article are based on the published D22 product data and should be confirmed for the exact configuration and order. View the reference product page.